SATO CT4-LX Operator'S Manual Download Page 149

Page: 149 / 564

149

•

If an RFID tag format is not registered, only [None Specified] is displayed. You can

menu.

16. Tap [Edit] and edit the name of the media profile to be registered.

You can enter 1 to 16 characters. You can use alphabet (capital and small letters), numbers and

symbols. If you do no edits, it is registered as "Media type Media profile number" (example: Label

1).

17. Tap or slide the screen to the left.

18. Confirm the settings, and then tap [Register].

19. Tap to finish.

The media profile is registered.

•

To cancel the settings you are currently doing, press the

(Power/Home) button.

Tap

on the message to confirm you want to discard the settings.

An icon is added to the Home screen for the media profile that was registered.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 149 / 564

Search results

Summary of Contents for CT4-LX

Reviews: