SATO CT4-LX Operator'S Manual Download Page 448

Page: 448 / 564

Replacing the Platen Roller

448

Replacing the Platen Roller

You can easily remove and replace a damaged or worn platen roller.

•

Do not connect or disconnect the power cord while your hands are wet. Doing so could

cause an electric shock.

•

Disconnect the power cord from the AC outlet before you replace the platen roller.

1. Make sure that the product is powered off, and disconnect the power cord from the

AC outlet.

2. Press the cover open latch (1) to open the top cover (2).

3. Remove the media if it is already loaded.

4. Raise the 2 levers (4) of the platen roller (3) to remove the platen roller.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 448 / 564

Search results

Summary of Contents for CT4-LX

Reviews: