SATO CT4-LX Operator'S Manual Download Page 303

Page: 303 / 564

303

Dashboard

[Dashboard] is the default page for the web configuration page. Each section shows specific

information or the current status of the product.

•

You can view the [Dashboard] page without logging in.

(1) [Printer Status]

Shows the current state (online, offline, error) and current status icons.

(2) [Printing]

Shows the print speed, darkness, sensor, print mode and backfeed setting.

(3) [Device]

Shows the model, current resolution and options that are installed.

(4) [Network]

Shows the current IP address and MAC address of the active interface.

(5) [System]

Shows the current firmware version, uptime, SNMP contact, name and location.

(6) [Wi-Fi]

Shows the current Wi-Fi setting.

•

This information is shown only if Wi-Fi is available and active.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 303 / 564

Search results

Summary of Contents for CT4-LX

Reviews: