SATO CT4-LX Operator'S Manual Download Page 229

Page: 229 / 564

229

270 degree

Labels are printed in inverse-landscape orientation.

[SOP Emulation]

Set the SOP emulation.
The options are as follows:

•

[Disabled]

•

[Prodigy Plus - 110]

•

[Allegro - 220]

•

[Prodigy - 250]

•

[Auto]

[Compatible Mode]

Set the compatible mode for SDPL.
The setting items are as follows:

[TTF]

Enable or disable TrueType font compatible mode.

Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.

Disable TrueType font compatible mode.

[Graphics]

Set whether to allow the registration of graphic data even if a line feed code is omitted.

[Compression]

Set whether to support graphic data created using unique compression formats.

[Right-to-Left print]

Set the Right-to-Left printing function.
The options are as follows:
Disabled

All texts are printed from left to right.

Auto

When an Arabic font is detected, the Arabic text is printed from right to left.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 229 / 564

Search results

Summary of Contents for CT4-LX

Reviews: