SATO CT4-LX Operator'S Manual Download Page 452

Page: 452 / 564

Operating the Notification Screen of the SOS (SATO Online Services) On-Demand Mode (SOS users only)

452

Operating the Notification Screen of the SOS (SATO Online

Services) On-Demand Mode (SOS users only)

In the SOS (SATO Online Services) function, the product information is sent to the SOS cloud and

monitored and managed.
The status icon

and the notification screen appear at the time specified when [SOS Mode] is

set to [On-Demand] in the [Interface] > [Network] > [Services] > [Online Services] menu and [Periodic

Notification] is enabled. A QR code with the product information is displayed on the notification screen.

You can send the product information to the SOS cloud by scanning the QR code with a specialized

application using a tablet or a smartphone.
The following shows how to operate the notification screen. The buttons on the screen change

according to the settings in [Update Screen].

When [Update Screen] Is Set to [Normal]

By tapping

, the display returns to the Offline screen without resetting the QR code for periodic

notification.
The status icon remains

By tapping

, the QR code displayed for periodic notification is reset and the display returns to the

Offline screen.
The status icon changes to

When [Update Screen] Is Set to [Print]

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 452 / 564

Search results

Summary of Contents for CT4-LX

Reviews: