SATO CT4-LX Operator'S Manual Download Page 219

Page: 219 / 564

219

(When [AUTO] is selected in the [Protocol] menu)

•

A message prompting you to restart the product appears on the Home screen if

[AUTO] is selected. In such a case, reboot the product to apply the settings.

•

Once the printer language is set, the name of the printer language will appear on the

Online/Offline screen.

•

Printer language is finalized with the received print data.

•

When [SBPL] > [Standard Code] in the [Applications] menu is disabled, the [Protocol]

setting will be changed to [SBPL].

[SBPL]

SBPL (SATO Barcode Printer Language) is used for the common commands that controls SATO

barcode label printers.
To use SBPL as a printer command, set the following items:

[Show Error]

Enable or disable the command error indication when incorrect command or parameter is detected in

the print data.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 219 / 564

Search results

Summary of Contents for CT4-LX

Reviews: