
Manually Setting the Print Mode
88
Manually Setting the Print Mode
You can change the print mode of the product according to product specification and its usage.
When [Auto-mode] is enabled, the print mode is set automatically according to the installed options.
You can manually set the print mode if you disable [Auto-mode]. The selectable print modes differ
according to the installed options.
Installed option
Print mode
None
Continuous/Tear-Off
Dispenser unit
Continuous/Dispenser
Cutter unit
Continuous/Tear-Off/Cutter/Cut & Print/Partial
cutter
Linerless cutter unit
Linerless cutter/Linerless tearoff
Change the print mode according to the following procedure:
1. Tap [SETTINGS] on the Home screen or Offline screen.
2. Input the password if it is enabled.
3. Tap [Printing].
Summary of Contents for CT4-LX
