SATO CT4-LX Operator'S Manual Download Page 121

Page: 121 / 564

121

Loading the Fan-fold Media

•

The print head and its surroundings are hot after printing. Be careful not to get burned.

•

Touching the edge of the print head with your bare hand could cause injury.

•

Fan-fold media is not available in dispenser mode since the perforated line affects the

dispenser function.

1. Press the cover open latch (1) to open the top cover (2).

2. Open the media loading port (3) on the back of the product.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 121 / 564

Search results

Summary of Contents for CT4-LX

Reviews: