
Safety Precautions
12
Do not disassemble
the product and the
AC adapter
Using the cleaning
fluid
•
Do not use cleaning fluids other than the ones supplied with the
product or recommended by us.
•
The cleaning fluid is to be strictly kept away from the fire. Never apply
heat or place it in the fire.
•
Keep the fluid out of reach of children to prevent them from
accidentally drinking it. If a child accidentally drinks the fluid,
immediately consult with a physician.
Do not touch or insert
any object in the cutter
•
Do not touch the cutter with your hands or insert foreign objects other
than media into the cutter. Doing so could result in injury.
Carrying the product
•
Do not carry the product while loaded with media or attached to an
optional external device. They could fall, possibly resulting in injury.
•
When setting the product on the floor or a stand, make sure not to
get your fingers or hands trapped under the product.
•
Before moving the product, be sure to power it off, unplug the power
cord from the outlet, and disconnect any connected cables. Moving
the product with the power cord or cables still connected could
damage them, possibly resulting in a fire, electric shock, or damage.
Do not place the
product in areas with
high humidity
•
Do not place this product in an area with high humidity or where
condensation occurs. If condensation has occurred, immediately
power off the product, and avoid using it until it is dried. Using the
product while condensation is on it could result in a fire, electric
shock, or damage.
AC adapter
•
An AC adapter could become hot. Be careful not to get burned.
Power cord and other
cables
•
Grab a power cord and other cables by the plug when removing from
the outlet or connector port. Removing a power cord and other cables
by grabbing the cord/cable area could result in exposure of wires,
breakage, fire, electric shock, or damage.
•
Do not place the power cord and other cables near a heater or other
sources of heat. Doing so could result in melting of the power cord
and other cables sheathing, fire, electric shock, or damage.
Summary of Contents for CT4-LX
