SATO CT4-LX Operator'S Manual Download Page 477

Page: 477 / 564

477

Description ("cc")

Cause

Invalid registration

area

•

Specified memory area (card slot) is inappropriate.

•

Tried to write to a write-protected media.

This number is

already registered.

Number specified by registration command has already been taken.

Over registration area

limit

Exceeded the registration area. (Memory full)

Data is not registered

Data, such as form overlay, is not registered.

Printing position is out

of printable area

The specified print start position is outside the printable area.

Barcode image is out

of printable area

The printing image is outside the printable area. (Barcode only)

PDF417 is specified

incorrectly

There is a mistake in the PDF417 specification.

Error in generating QR

code

There was a fault when generating the QR code.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 477 / 564

Search results

Summary of Contents for CT4-LX

Reviews: