SATO CT4-LX, Operator'S Manual, Page: 185 / 564

185
[Gateway]
Set and check the default gateway address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the gateway address you received
from the DHCP server.
If you have selected [Static] in the [Mode] menu, set the default gateway address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
• The gateway address set here is shared with the settings in [Wi-Fi] > [Wi-Fi Setting] >
[IPv4 (Wi-Fi)].
[DNS]
Set and check DNS server addresses.
If you have selected [DHCP] in the [Mode] menu, the screen shows the DNS server address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, set the address of the DNS server.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
• You can register up to three IP addresses for the DNS server. Use a comma to delimit
different IP addresses.
• The DNS server address set here is shared with the settings in [Wi-Fi] > [Wi-Fi Setting]
> [IPv4 (Wi-Fi)].
[IPv6 (LAN)]
Set the IPv6 for the LAN.
•
After finishing the settings, tap . After a message asking you whether to save the
settings appears, tap .
•
Tap to discard the changes. Tap on the message to confirm you want to
discard the changes.
• You cannot change [IP Address], [Prefix Length], [Gateway], or [DNS] if [Mode] is
anything other than [Static].
The setting items are as follows:
[Mode]
Select the IP address assignment method or disable IPv6.
The options are as follows:
Disable
Disable IPv6.