SATO CT4-LX Operator'S Manual Download Page 464

Page: 464 / 564

464

Cause and Countermeasure

Reference

Countermeasure (4)

Remove the jammed media.
Refer to the video for loading the media, for

the media path, and for the operation of each

part inside the product.

Cause (5)

The media sensor is not operating correctly.

◦

The media sensor is dirty, or there is a

label attached to it.

◦

The media sensor has poor sensitivity.

Countermeasure (5)

Clean the media sensor.

Cleaning the Inside of the Product

Contact your SATO technical support if the error cannot be resolved.

Contact Information for When You Are in Trouble

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 464 / 564

Search results

Summary of Contents for CT4-LX

Reviews: