Web Interface - Inputs (ctd.)
Input Sync Relay
- Configures the clock to receive synchronization data from the selected Sync-
wire protocol. Any of the following protocols may be selected by the user: Refer to your master
clock manual for more information on each protocol.
58 Minute Sync_1
58 Minute Sync_2
58 Minute Sync_3
58 Minute Sync_4
National Time_Rauland
Dukane Digital
Rauland Digital
59 Minute Sync
Once a Day Pulse**
**If Once a Day Pulse is selected, fields for Hours, Minutes, and Seconds will appear. Enter the time (in 24 hour format; 1:00 PM = 13:00) when the Once a
Day pulse is present. The pulse must last for longer than one second.
Submit
- Applies any changes to the previous options when pressed.
Code Blue is a special-purpose count up designed for use in hospitals and other medical facilities. This
function overrides the control panel LED settings. The lights are green while the timer is running and red
when the timer has been paused.
Code Blue 1:
When an input programmed with Code Blue is activated for the first time, the count up starts.
When the input is activated a second time, the count up pauses. If the input is activated a third time, the
count up will resume.
If a button programmed with the Start/Stop function is pressed while Code Blue is running, the count up
will pause. If Start/Stop is pressed again, the count up will resume.
Code Blue 2:
When an input programmed with Code Blue is activated for the first time, the count up starts.
When the input is activated a second time, the count up pauses. If the input is activated a third time, the
count up will resume.
If a button programmed with the Start/Stop function is pressed while Code Blue is running, the count up
will pause. If Start/Stop is pressed again, the count up will resume.
67
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
