1.
Di
splay Format -
Allows the user to select how the time is displayed on the clock. There are two options: 12
hour format (3:00AM/3:00PM) or 24 hour format (3:00/15:00).
2.
Date Format -
Sets the date to display in either American style: MM:DD:YY or European style: DD:MM:YY. For 4
digit clocks, the date will display in either American style: MM:DD or European style: DD:MM.
3.
Temperature Format -
If a temperature sensor was installed on the clock, this option allows a user to select
whether the temperature appears in Fahrenheit or Celsius.
4.
Brightness -
Sets the brightness level that the clock will display. There are a few levels to choose from: Auto,
High, Medium, Low or Off. Auto, the default setting, will automatically adjust the display brightness when external
light levels change.
5.
Seconds Time Displayed* -
The clock will display the time for the number of seconds entered in the box. After
the selected amount of time passes, the clock will change to show Date or Temperature. If a time of 0 is selected,
the clock will not display the time. If Date and Temp Displayed are set to 0, the clock will only display the time.
6.
Seconds Date Displayed* -
The clock will display the date for the number of seconds entered in the box. After
the selected amount of time passes, the clock will change to show the Time or Temperature. If a time of 0 is selected,
the clock will not display the date. If Time and Temp Displayed are set to 0, the clock will only display the date.
*Note:
If the Time, Date, and Temp Displayed are ALL set to 0, the display will turn completely blank. It will turn on
for count down/up, and off again once the counting has been cleared.
Web Interface - Display Settings
1
3
5
2
4
6
CONTINUES ON NEXT PAGE
59
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
