22
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Double and Flag Mount Installation
Included in Clock Package(s)
Description
Large Digital Clock
Mounting plate
Mounting bracket
Upper Mounting bracket
Securing Screw
Bracket Screw
Quantity
1
2
2
0 or 2 (depending on model)
2
8 or 16 (depending on model)
Picture
VERY IMPORTANT:
CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL. REFER TO THE SYNCHRONIZATION
SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.
All network and/or master clock equipment must be powered and configured before you install the clock. If the network and/or master
clock equipment is not properly installed and powered, and if the clocks have not been configured to communicate with this equipment, the
secondary clocks will not synchronize.
Multiply everything on this page by two if you are setting up a double-mount clock.
To power the clock, you will need a 3-conductor cable with double isolation. A PoE clock
does not need this cable as power is provided through the network cable. PoE clocks can
be identified by their part number, which will always end in 0. All other clocks require the
3-conductor cable.
