5 6
7 8
19
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation
5) Pass screws through the washers, followed by the
wall plates and wall anchors (if used). Secure tightly.
7) Use a Phillips screwdriver to open the wiring
panel. Store the screws in a safe place.
8) Unscrew the seal nuts that cover the gasket
sizes that most closely resemble the diameter
of your power cable. If you are also installing
communication cables, do the same with a second
seal nut and gasket. You may save or discard the
sealing pegs for each gasket that’s being replaced
by a wire.
6) Attach the mounting pieces to the wall plate.
NOTE: Do not remove the
seal nut or peg if you are
not using the gasket that
it covers.
