SINUS PENTA
PROGRAMMING GUIDE
84
/
486
11. DISPLAY/KEYPAD
MENU
11.1. Overview
NOTE
It is recommended that the “Operating and Remoting the Keypad” section in the Motor
Drives Accessories – User Manual be read as well.
The Display/Keypad Menu contains programming parameters to do the following:
Set the navigation mode within the drive menus;
Select the Root Page;
Select measures from the Root Page and the Keypad Page;
Select the type of Keypad Page displayed in Local mode;
Set custom PID units of measure;
Disable the
LOC/REM
or
FWD/REV
keys in the keypad.
The Root Page, the Keypad Page and Local mode are detailed in the following sections.
11.2. Root Page
I
N V E R T E R
O K
→
+
1 5 0 0
.
0 0
r
p m
→
+
0
.
0 0
r
p m
M E A
P A R
C F
[
I D P
]
The Root page is factory-set as the startup page to be displayed when the drive is turned on.
NOTE
You can access the four main menus only from the root page:
MEA
→
Measures;
PAR
→
Programming parameters;
CF
→
Configuration parameters;
IDP
→
Product identification.
Line 1 on this page displays the drive operating status (see the description of parameter
M089
).
Lines 2 and 3 display two measures which may be selected with parameters
P268
,
P268a. These measures can
be scaled through parameters P268y and P268z.
Line 4 displays the four main menus of the drive. The selected menu is displayed in square brackets: use the
▲
and
▼
keys to select a different menu. Press the
SAVE/ENTER
key to access the selected menu.
