Samson trovis 5600, Mounting And Operating Instructions

Page: 99 / 128

12.1 Memory pen
The use of a memory module (order no. 1400-9379) is particularly useful to transfer all data
from one TROVIS 5610 Controller to several other TROVIS 5610 Controllers.
The memory module is plugged into the RJ-12 jack at the front of the controller (optional inter-
face board (1402-0321) is required). Once the module has been connected, 'READ COPA
FROM MEMORY PEN' and 'SAVE COPA TO MEMORY PEN' buttons appear on the screen,
provided the memory pen already contains data from a TROVIS 5610 Controller. If the memory
pen is empty or contains data from a different controller model, only the 'SAVE COPA TO
MEMORY PEN' button appears. After data transfer has been completed, 'OK. Remove pen' ap-
pears. If data transfer is not completed successfully, 'Error' appears on the screen.
12.2 TROVIS-VIEW
The TROVIS-VIEW software can be used to configure the controller and change parameter set-
tings. It can be connected directly to the controller when the controller is fitted with a suitable in-
terface board or indirectly using a memory pen. The software is based on the modular principle
and consists of an operator interface, a communications server and device-specific modules.
The operation of TROVIS-VIEW is similar to Windows
® Explorer.
The TROVIS-VIEW software can be downloaded from the SAMSON website (Services > Soft-
ware > TROVIS-VIEW). It is also available on a CD-ROM on request.
EB 5610 EN
99
Interfaces