Samson trovis 5600, Mounting And Operating Instructions

Page: 30 / 128

30
EB 5610 EN
Setup settings
3.7.1 Changing the system code number
Any setup settings that have been made are reset when the system code number is changed.
NOTICE
The wiring differs depending on the system. Before changing the system code number, the elec-
trical connections may need to be changed. Refer to sections 5 and 11.
The following instructions start from the configuration and parameter level (see page 29).
Open the screen displaying the system schematics.
The schematics of the currently valid system are shown
(see section 5).
Select a different system.
Confirm the new system.
'System saved' appears on the screen.
Return to start screen.
3.7.2 Activating or deactivating functions
The following instructions start from the configuration and parameter level (see page 29).
Select the menu item for configuration levels.
The various configuration levels of the currently valid
system appear.
Select the configuration level. Depending on the cur-
rently valid system:
4
HC1–CO1
4
DHW–CO4
4
HC1–CO5