manualshive.com logo in svg

Samson FOUNDATION 3730-5, Configuration Manual, Page: 55 / 128

Share
Download
Samson FOUNDATION 3730-5 Configuration Manual Download Page 55

KH 8384-5 EN 

 55 

Parameter lists

AO TRD: FST_MEAS_DATA1 (239) to FST_MEAS_DATA3 (241)

Storage class D; read capability r

Measured data assessment of the full stroke test (FST)

FST_MEAS_DATA1 (271) = Current test
FST_MEAS_DATA2 (272) = First measured data assessment saved
FST_MEAS_DATA3 (273) = Second measured data assessment saved

• 

FST_TIME_STAMP · Time stamp for this test

• 

FST_OVERSHOOT_RISING · Overshoot (rising)

• 

FST_DEAD_TIME_RISING · Dead time (rising)

• 

FST_T63_RISING · T63 (rising)

• 

FST_T98_RISING · T98 (rising)

• 

FST_RISE_TI_RISING · Rise time (rising)

• 

FST_SETTL_TI_RISING · Settling time (rising)

• 

FST_OVERSHOOT_FALLING · Overshoot (falling)

• 

FST_DEAD_TI_FALLING · Dead time (falling)

• 

FST_T68_FALLING · T63 (falling)

• 

FST_T98_FALLING · T98 (falling)

• 

FST_RISE_T_FALLING · Rise time (falling)

• 

FST_SETTL_T_FALLING · Settling time (falling)

AO TRD: FST_RAMP_RATE (88)

 · This parameter is not supported.

AO TRD: FST_SETTINGS (237)

Storage class D; read/write capability r/w; supported modes O/M/A

Settings for the full stroke test (FST)

• 

FST_TOL_LIMIT_RESPONSE · Tolerance limit for step start/end values

• 

FST_ACTIV_RAMP_FUNCTION · Activate ramp function

• 

FST_RAMP_TIME_RISING · Ramp time (rising)

• 

FST_RAMP_TIME_FALLING · Ramp time (falling)

• 

FST_SETTLING_TIME · Settling time before starting test

• 

FST_SCAN_RATE

AO TRD: FST_STRK_TRAV_TIMEOUT (89)

Storage class S; read/write capability r/w; supported modes O/M/A

Cancellation conditions of the full stroke test (FST): perm. time until step end 0.0 to 25000 

s, [15.0 s]

Summary of Contents for FOUNDATION 3730-5

































































































































Reviews:

No comments