manualshive.com logo in svg

Samson FOUNDATION 3730-5, Configuration Manual, Page: 123 / 128

Share
Download
Samson FOUNDATION 3730-5 Configuration Manual Download Page 123

KH 8384-5 EN 

 123 

Parameter lists

DI FB:

MODE_BLK (5)

Storage class N; read/write capability r/w; supported modes O/M/A

Operating mode

 

– Target Mode (Code 48 t4 for DI1 

 Code 48 t7 for DI2)

 

– Actual Mode (read only)

 

– Permitted Mode 

 

– Normal Mode (read only)
• 

O/S · The DI Function Block is not executed. The last value is issued at the output OUT_D.

• 

MAN · The output value of the DI Function Block can be entered manually by the operator 

over the OUT_D parameter.

• 

AUTO · The binary input value (FIELD_VAL_D) is processed by the function block and 

issued as OUT_D.

DI FB:

OUT_D (8)

Storage class S; read/write capability r/w; supported modes O/M

Discrete output variable (value and status) 

 Code 48 I4/5 for DI1 

 Code 48 L4/5 for 

DI2

DI FB:

PV_D (7)

Storage class D; read capability r

Indicates the discrete state (including status) used for the function block.

Note:

 In AUTO mode, the PV_D parameter is identical with output OUT_D.

DI FB:

PV_FTIME (16)

Storage class S; read/write capability r/w; supported modes O/M/A
Filter time constant [s] of the digital filter until a binary state at the input of the function block 

is adopted in the PV_D parameter.

•  [0]

DI FB:

SIMULATE_D (9)

Storage class S; read/write capability r/w; supported modes O/M/A
Simulation: Input of the discrete input value (FIELD_VAL_D) with status

Note:

 The simulation can only be activated if it is enabled at the positioner (Code 48 F3) 

and in the function block.

Summary of Contents for FOUNDATION 3730-5

































































































































Reviews:

No comments