manualshive.com logo in svg

Samson FOUNDATION 3730-5, Configuration Manual, Page: 119 / 128

Share
Download
Samson FOUNDATION 3730-5 Configuration Manual Download Page 119

KH 8384-5 EN 

 119 

Parameter lists

DO FB:

SIMULATE_D (10)

Storage class D; read/write capability r/w; supported modes ALL
Simulation of the process variable PV_D of the block (value and status)

Note:

 During simulation, OUT_D is not transmitted to the Transducer Block; the block 

retains the last valid value received before simulation was activated. The simulation can 

only be activated when SIMULATE ACTIVE is set in the BLOCK_ERR parameter of the 

Resource Block.

DO FB:

SP_D (8)

Storage class N; read/write capability r/w; supported modes O/M/A
Discrete set point (reference variable) in AUTO mode

DO FB:

ST_REV (1)

Storage class N; read capability r

Static revision number

Note:

 The revision number is incremented with each change of a static parameter in the 

block.

DO FB:

STATUS_OPTS (15)

Storage class S; read/write capability r/w; supported modes O

Options for status handling

• 

UNCERTAIN as GOOD · The status of OUT is set to GOOD if the status of the input 

value IN_x is UNCERTAIN.

• 

UNCERTAIN IF MAN MODE · The status of OUT is set to UNCERTAIN if the actual 

mode is set to MAN.

DO FB:

STRATEGY (3)

Storage class S; read/write capability r/w; supported modes ALL

Permits strategic grouping and thus faster processing of blocks

•  [0]

Blocks are grouped by entering the same number in the STRATEGY parameter of each 

block.

Note:

 These data are neither checked nor processed by the DO Function Block.

DO FB:

TAG_DESC (2)

Storage class S; read/write capability r/w; supported modes ALL
User-specific text for unique identification and assignment of the block

•  Max. 32 characters, [no text]

Summary of Contents for FOUNDATION 3730-5

































































































































Reviews:

No comments