manualshive.com logo in svg

Samson FOUNDATION 3730-5, Configuration Manual, Page: 122 / 128

Share
Download
Samson FOUNDATION 3730-5 Configuration Manual Download Page 122

 122  

KH 8384-5 EN

Parameter lists

DI FB:

CHANNEL (15)

Storage class S; read/write capability r/w; supported modes O
Assignment of the output of DI Function Block and the logical hardware channels (Transducer 

Block) [1] in DI1 Function Block and [2] in DI2 Function Block

Note:

 Set CHANNEL to 1 to start up the DI1 Function Block. This allows it to be assigned to 

DI1 TRD. Set CHANNEL to 2 to start up the DI2 Function Block. This allows it to be assigned 

to DI2 TRD.

DI FB:

DISC_ALM (24)

Storage class D; read capability r

Discrete alarm (status, time and date of alarm, value that triggered the alarm)

The value entered in DISC_LIM parameter is exceeded.

Note:

 Additionally, the active alarm can be confirmed manually in this parameter group.

DI FB:

DISC_LIM (23)

Storage class S; read/write capability r/w; supported modes O/M/A

Limit for discrete alarm

•  [0], 1

DI FB:

DISC_PRI (22)

Storage class S; read/write capability r/w; supported modes O/M/A
Alarm configuration (behavior on reaching the DISC_LIM limit)

• 

[0] · The violation of the limit is not analyzed.

• 

1 · No notification upon violation of the limit

• 

2 · Reserved for block alarms

• 

3 to 7 · The violation of the limit is issued to notify the operator with the corresponding 

priority: (3 = low, 7 = high)

DI FB:

FIELD_VAL_D (17)

Storage class N; read capability r
Discrete input variable of the DI Function Block (value and status) 

 Code 48 I2/3 for DI1, 

Code 48 L2/3 for DI2

DI FB:

GRANT_DENY (12)

 · This parameter is not supported.

DI FB:

IO_OPTS (13)

Storage class S; read/write capability r/w; supported modes O
Selects the input/output behavior of the DI Function Block.

• 

INVERT · Sets a logic NOT operation between the input FIELD_VAL_D and output OUT_D.

Summary of Contents for FOUNDATION 3730-5

































































































































Reviews:

No comments