manualshive.com logo in svg

Samson FOUNDATION 3730-5, Configuration Manual, Page: 46 / 128

Share
Download
Samson FOUNDATION 3730-5 Configuration Manual Download Page 46

 46  

KH 8384-5 EN

Parameter lists

AO TRD: CLOSED_POS_DEADBAND (61)

Storage class S; read/write capability r/w
Zero limit [%] 

 Code 48 d5

AO TRD: CLOSED_POS_SHIFT (62)

Storage class N; read capability r

Lower end position shift

AO TRD: CLOSING_DIRECTION (121)

Storage class S; read/write capability r/w; supported modes O/M/A

Closing direction 

 Code 34

Lever's direction of rotation for travel pick-off which causes the CLOSED position (0 % 

position) of the control valve to be reached.

Note:

 Only necessary with SUB initialization mode.

AO TRD: CONFIG_BINARY_INPUT_2 (110)

Storage class S; read/write capability r/w; supported modes O/M/A

Sets the logical state of DI2

• 

[NOT EVALUATED]

• 

ACTIVELY OPEN

• 

ACTIVELY CLOSED

• 

ACTIVELY OPEN – LEAKAGE SENSOR

• 

ACTIVELY CLOSED – LEAKAGE SENSOR

Note:

 The parameter is processed by the BINARY_INPUT_2 parameter. The parameter 

settings do not depend on DI2 Transducer Block.

AO TRD: COUNTER_INIT_START (138)

Storage class D; read capability r

The total number of initializations that have been performed since the last reset 

 Code 

48 d4

AO TRD: CUSTOM_CURVE_DESCRIPTION (63)

 · This parameter is not supported.

AO TRD: CUSTOM_CURVE_XY_FLOAT (65)

Storage class S; read/write capability r/w; supported modes O/M/A
Enter the user-defined characteristic

Summary of Contents for FOUNDATION 3730-5

































































































































Reviews:

No comments