manualshive.com logo in svg

Samson FOUNDATION 3730-5, Configuration Manual, Page: 2 / 128

Share
Download
Samson FOUNDATION 3730-5 Configuration Manual Download Page 2

 

2  

KH 8384-5 EN

Note on this manual

This manual assists you in mounting and operating the device safely. The manual is binding 
for handling SAMSON devices.

 

Î

For the safe and proper use of this manual, read it carefully and keep it for later 
reference.

 

Î

If you have any questions about this manual, contact SAMSON‘s After-sales Service 
Department ([email protected]).

The manual for the devices is included in the scope of delivery. The latest 
documentation is available on our website (www.samson.de) > Product 
documentation. You can enter the document number or type number in the 

[Find:] field to look for a document. 

 Definition of signal words 

Hazardous situations which, if not avoided, 
will result in death or serious injury

Hazardous situations which, if not avoided, 
could result in death or serious injury

Property damage message or malfunction

Additional information

Recommended action

DANGER

!

WARNING

!

NOTICE

!

Note

Tip

Installation, start-up and on-site operation of the positioner are described in the Mounting 
and Operating Instructions 

u

 EB 8384-5.

NOTICE

!

Summary of Contents for FOUNDATION 3730-5

































































































































Reviews:

No comments