manualshive.com logo in svg

Samson FOUNDATION 3730-5, Configuration Manual, Page: 28 / 128

Share
Download
Samson FOUNDATION 3730-5 Configuration Manual Download Page 28

 28  

KH 8384-5 EN

Parameter lists

RES:

ACK_OPTIONS (38)

Storage class S; read/write capability r/w; supported modes O/A

Automatic alarm acknowledgement

• 

Resource Block

• 

[UNDEFINED] · No selection

• 

DISC ALM · Write protection was changed

• 

BLOCK ALM · Block alarm

Note:

 The alarm is broadcast to the fieldbus host system, but not acknowledged by it.

RES:

ALARM_SUM (37)

Storage class S; read/write capability r/w; supported modes O/A
Current status of process alarms in the Resource Block

• 

DISC ALM · Write protection was changed

• 

BLOCK ALM · Block alarm

Note:

 The process alarms can also be deactivated in this parameter group.

RES:

ALERT_KEY (4)

Storage class S; read/write capability r/w; supported modes O/A

ID number of the plant section

•  1 to 255, [0]

Used by the fieldbus host system to sort alarms and events.

Note:

 '0' is not permissible and will be rejected when transferring data to the device (error 

alarm).

RES:

ALL_ACTIVE_STATUS_MESSAGES (84)

Storage class S; read/write capability r/w

Active status or error messages of the diagnositics

RES:

BLOCK_ALM (36)

Storage class D; read capability r
Current block state with details on all configuration, hardware or system problems in the 

block including date and time stamp.

Summary of Contents for FOUNDATION 3730-5

































































































































Reviews:

No comments