Riedel MediorNet User Manual Download | Manualshive

Page: 99 / 310

background image

99

MediorNet User Manual 2.00.0

5.7.2

Icons

This chapter explains all Icons used in the MediorWorks Software.

Alarm Icons

Information, for instance after creating a connection

Warning, for instance the temperature of a Frame is rising

Alarm, for instance the temperature of a Frame is too high

General Icons

Mute disabled

Mute enabled

1kHz test signal disabled

1kHz test signal enabled

Connections

Connection is active, Signal is transmitted.

Bidirectional connection active (for instance Artist Port, or link port).

Connection is interrupted, for instance Card was unplugged, or fiber was removed.

Bidirectional connection is interrupted.

Connection is damaged; parts of the allocation are failing.
Difference to interruption: damaged connection can only be fixed by re-routing.
This state occurs when:
1. A connection is set up from Frame A via Frame B to Frame C.
2. If Frame C is removed from the network.
3. If the connection will be deleted on Frame A, the connection will be deleted on Frame A and
B, but not on Frame C, due to C isn’t attached any more.
4. If Frame C will be reconnected, the state is set to damaged. The connection is still configured
on Frame C.
In this case the issue could be solved by performing a re-routing (if the bandwidth is sufficient).

bidirectional connection is damaged

SubChannels

:

If the ParentChannel is used in a connection. For instance if a MADI connection is used, all
SubChannels are marked with the gray connection icon.

ParentChannel:

If minimum one SubChannel in a connection is used. I.e. if a MADI SubChannel connection is
used, the MADI Channel is marked with the gray connection icon.

Restriction:

Output-Channels marked with this gray icon can

not be used for new connections.

USO

RESTRITO

«
...
97
98
99
100
101
...
»

Summary of Contents for MediorNet























































































































































































































































































































Reviews:

No comments

Related manuals for MediorNet

Brand: TCS Pages: 28

Brand: AVGO Pages: 14

Brand: Aiphone Pages: 32

Brand: SpeakerCraft Pages: 2

Brand: Vip-Vision Pages: 40

Brand: EAW Pages: 2

Brand: M-system Pages: 8

Brand: Mission Pages: 2

Brand: Hago Pages: 7

IP Force 9151101W

Brand: 2N Pages: 118

Brand: Sonos Pages: 9

Brand: Aiwa Pages: 68

Brand: LEM Pages: 18

Brand: Topp Music Gear Pages: 8

Brand: urmet domus Pages: 32

Brand: Trevi Pages: 24

Coldrink 1-MC2 System EV9612-56

Brand: Everpure Pages: 2

Brand: Denver Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands