Riedel MediorNet User Manual Download

Page: 114 / 310

114

MediorNet User Manual 2.00.0

MN-Modular Frame CONFIGURATION

5.7.7.1

In the headline are the type and name of the Frame shown.

Figure 157: Fram e CONFIGURATION

The meanings of the different fields are described in the table below:

Frame Long Name

Detailed name of the Frame.

Frame Short Name

Short name of the Frame.
This is also the default prefix for the Channel names.

Apply Short Name

Apply the entered short name.

System Location

Location information

System Contact

Contact information (f.i. in case of trouble)

LED Brightness

The brightness of the status LEDs of the Frame can be adjusted between 0% -
100% (exceptions are the Fan and PSU)

User Notes

empty field for the user to enter any notes

The brightness can be changed either by up & down arrow-cursor-keys or by the mouse-wheel:
Mouse-wheel or arrow-cursor key only: 1 step, with pressed

ALT-key: 5 steps, with pressed SHIFT-

key: 10 steps.

USO

RESTRITO

Summary of Contents for MediorNet























































































































































































































































































































Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands

Riedel MediorNet, User Manual

Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands