Riedel MediorNet User Manual Download

Page: 166 / 310

166

MediorNet User Manual 2.00.0

MN-Compact Ethernet CONFIGURATION

5.7.7.21

In the headline is the name of the Frame and the Ethernet Card as well as the slot shown.

MN-Compact Ethernet Card CONFIGURATION

Figure 211: MN-Com pact Ethernet Card CONFIGURATION

In this field the name of the Card can be entered or changed.

MN-Compact Ethernet 1-3 CONFIGURATION

The contents of the tabs

Eth 1 to Eth 3 have the same structure.

Figure 212: MN-Com pact Ethernet CONFIGURATION

In this window the name of the Channel can be entered or changed and the required bandwidth can be
selected.

USO

RESTRITO

Summary of Contents for MediorNet























































































































































































































































































































Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands

Riedel MediorNet, User Manual

Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands