Riedel MediorNet User Manual Download

Page: 110 / 310

110

MediorNet User Manual 2.00.0

Device

Enabled for
RockNet View

This setting concerns devices with Presets. Presets are only supported by
RockWorks. The "RockNet View" needs to be enabled for this device types.

Gain Type

Enabling of the Independent Gain feature.

Display

Switches the displays at the device on/off.

Lock Front Panel

Disable the operation on the front panel at the device.

Mode

only RN.334.MD:

Enabling of the SSL mode.

Device specific settings

Emul-Mode

only RN.131.MY/RN.341.MY:

Enabling the Yamaha MY8 emulation.

Desk-ID

only RN.131.MY/RN.341.MY:

Freely selectable number of the Yamaha-console. The

same Desk-ID must by assigned, if multiple RN.141.MY/RN.341.MY-Cards are
plugged in one Yamaha-console.

Slot-ID

only RN.131.MY/RN.341.MY:

Number of the slot in the Yamaha-console, where the

Card is plugged.

48V Control

only RN.301.MI:

Defines, if the Phantom-Power can be controlled remotely via the

Independent Gain feature or if the setting is done locally at the device.

Channels

only RN.334.MD:

Activates the 56 Channel mode (only Drops).

Priority

only RN.334.MD:

Defines the preferred Channel, if the optical and electrical input

are active.

Mode

only RN.343.VI:

The Card is able to work in Soundcraft or Studer mode.

Adds/Drops

only RN.344.SI:

The number of channels, which are routed from RockNet in the

console.

USO

RESTRITO

Summary of Contents for MediorNet























































































































































































































































































































Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands

Riedel MediorNet, User Manual

Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands