Riedel MediorNet User Manual Download

Page: 171 / 310

171

MediorNet User Manual 2.00.0

MN-C-OPT-SDI CONFIGURATION

5.7.7.24

In the headline is the name of the Frame and the option Card as well as the slot shown.

The Compact-option Cards

SDI-8I, SDI-8O and SDI-4I4O have the same structure.

The difference is the amount of available in-/output channels.

SDI-8I

8 inputs

SDI-8O

8 outputs

SDI-4I4O

4 inputs, 4 outputs

MN-C-OPT-SDI Card CONFIGURATION

Figure 218: MN-C-OPT-SDI Card CONFIGURATION

The meanings of the different fields are described in the table below:

Name

Name of the Card

Channel x,y
Broadcast
Format

Selection of the output signal format (PAL, NTSC) depending on the input signal. No
format conversion is performed. See chapter

Supported Formats

Channel x,y
out sync

System sync:

Video signal at output is synchronized to the system clock.

Source sync:

Video signal at output x keeps the same phase of the input signal.
Output y disabled.

USO

RESTRITO

Summary of Contents for MediorNet























































































































































































































































































































Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands

Riedel MediorNet, User Manual

Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands