Riedel MediorNet User Manual Download

Page: 304 / 310

304

MediorNet User Manual 2.00.0

5.9.1

File

Exit

5.9.1.1

This command will close the MediorUpdate application.

5.9.2

System

Choose Network Interface

5.9.2.1

This command offers the same features like the

Configure Network Interface

command in MediorWorks.

Frame Address Properties

5.9.2.2

This command offers the same features like the

Frame Address Properties

command in MediorWorks, except

the tab

Node ID Configuration is not available in MediorUpdate.

Reboot/Restart Frames

5.9.2.3

This command offers the same features like the

Reboot/Restart Frames

command in MediorWorks.

Configure Service Handler

5.9.2.4

This command offers the same features like the

Configure Service Handler

command in MediorWorks.

5.9.3

Options

Expert Mode

5.9.3.1

If the checkbox

Expert Mode is not checked, the selected frames are updated completely.

If the checkbox is checked, the user can select for each component separately, if the update should be
performed. Furthermore the version can be determined for each component.

USO

RESTRITO

Summary of Contents for MediorNet























































































































































































































































































































Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands

Riedel MediorNet, User Manual

Search results

Summary of Contents for MediorNet

Reviews:

Related manuals for MediorNet

Brands by name

Popular brands