Riedel MediorNet, User Manual

Page: 298 / 310

298
MediorNet User Manual 2.00.0
SNMP-Server Activation 5.8.5.2
For accessing status information from the MediorNet system, an SNMP interface (Simple Network
Management Protocol) on UDP/IP port 161 is available. This interface provides read-only access via the
SNMPv2 protocol.
The button
Activate Selected will enable the protocol on the selected Frame. Deactivate selected will disable the
protocol.
Figure 352: SNMP-Server Activation
General SNMP information
MediorNet implements the SNMP v2c Standard.
The current MediorNet SNMP implementation can only be used for polling, no traps will be sent.
The currently implemented parameters are mainly switch parameters and information about all Cards of a
Frame.
Overview of available parameters:
guid temperature
name cpuLoad
userNotes psu1
packageVersion psu2
contact syncIn
location syncOut
fanSpeed syncState
slotTable (cardName, cardStatus, cardTemperature, cardType)
linkTable (linkStatus, inputUsage, outputUsage, linkCapacity, destGUID, destSlot, destLink)
videoPortTable (portDirection, portName, portStatus, videoFormat, embAudio01-16)
gpiTable (gpiDirection, gpiName, gpiStatus)
A slot information provided via SNMP could look like this:
Figure 353: SNMP-Exam ple
USO
RESTRITO