OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
PAGE 91
CHAPTER
PSR SONIC
The sensor placement is dependent on the driving mode. Preferably
we use the 3rd hole from the middle of the plate.
Advice!
The sensor adjustment or distance from the
object (crop edge or track angle) should be between 20
and 28 inches. To achieve this dimension we can slide
the sensor sideways or raise/lower the carrier frame.
Attention!
For trouble free operation, always keep the
sensor pairs
1
/
2
and
3
/
4
together. Also make sure
the pairs on each side should be the same distance
from the center of the vehicle.
All sensors should be set in the same hole on the mounting plate.
Exception: When driving in the crop edge with correction mode. In
that configuration the sensor
2
and
3
should point straight down.
PSR SONIC sensors can recognize plants when about 4 inches tall.
When creating a marker track (furrow) make sure it looks similar
to the sketch provided.
Picture 150:
Adjust sensor
Picture 151:
Track shape
6 - 8 inches
4 - 6 inches
