OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
PAGE 65
CHAPTER
PSR SKY
Direction/Working width
The display field
C
shows the target direction in which you are
working.
The second line, “W-width”, indicates the working width currently
set in the system.
Reception strength
The display field
D
shows the GSM reception strength. The adjacent
table shows an overview of the available reception strength.
Advice!
GSM reception is only available if you installed
an RTK CLUE-Modem.
The second line indicates the base station from which the
correction signal is received.
Work Data
In this display field, all important data relating to the actual GPS
job is shown.
In the display field
E
the deviation from the current guide line is
given in inch. The deviation is additionally displayed as arrows. The
direction of the arrow represents the required steering correction.
The track counter
F
shows the current track number where the
vehicle is located. Track # 0 is the established reference line.
Tracks to the right are positive and tracks to the left are negative.
The possible max number would be -9999 to + 9999.
Advice!
In the drive mode PSR SKY is a deviation
distance left or right from the reference line indicated.
It means that all following passes are being pushed left
or right.
E
Reception
99
No reception
0-10
Weak reception
32
Full reception
Table 3:
GSM reception strength
Picture 100:
Main screen PSR SKY
F
Picture 98:
Main screen PSR SKY
C
Picture 99:
Main screen PSR SKY
D
