OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
PAGE 41
CHAPTER
OPERATION
GPS receiver type
Here you can choose from among 3 protocol types depending on
the GPS interface on the vehicle.
Choose
and confirm the selection.
Advice!
is only available if the current type is
. Otherwise the menu directly jumps to “Set type”
(Picture 53).
Press the function keys
,
to select the desired type.
The protocol
is a serial interface. GPS messages are
evaluated which are received in the format NMEA_0183.
Advice!
It is recommended to use the following settings:
•
RMC = 10 Hz, GGA = 1 Hz
or
•
GGA = 5 Hz, VTG = 5 Hz
Protocols
and
are standard CAN BUS protocols. One
of these protocols is supported depending on the GPS receiver
used; please refer to the manual of the respective GPS receiver:
VDS and VP each 5-10 Hz
PRU and CSRU each 10 Hz, GNSS - 1 Hz
Picture 52:
Select type
Picture 53:
Set type
