OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
PAGE 37
4.9.4. Setting the GPS receiver
In order to connect a GPS receiver to the automatic steering
system, settings must be made accordingly.
Advice!
A GPS receiver is required for PSR SKY operation.
In addition, the GPS receiver can be used as a speed
sensor for all other drive modes.
Choose
and confirm the selection.
Setting the RGS receiver
RGS receivers refer to GPS receivers which can be purchased
directly from Reichhardt. The distinction is made here between
GPS receivers which process DGPS correction signals and those
which are RTK capable. This affects the precision which you can
obtain with your steering system.
The settings of the RGS receiver can be adapted to your person-
al applications. The RGS receiver has 2 ports.
An ULTRA GUIDANCE PSR ISO is connected to the port
“PSR”. The port “Other” is freely available for your personal
requirements, e.g. for surveying.
Advice!
These functions are only available to you if you
use an RGS receiver.
Choose
and confirm the selection.
Advice!
If
is not visible,
must be set to
.
Picture 44:
Selecting set GPS receiver
Picture 45:
Setting set RGS receiver
CHAPTER
OPERATION