OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
PAGE 57
CHAPTER
OPERATION
4.10. Setting parameters – Adjusting values
The menu Set parameters is used to adjust or reset all the re-
quired parameters.
Advice!
The function key
can be used at any time
to cancel all changes and to leave the menu.
Advice!
The function key
only appears when you
have made an entry. The data is accepted when you
press this function key. Proceed as described in chapter
4.12.
Parameter selection
Each parameter is designated by a number.
•
Press the function keys
,
until the desired
parameter is shown.
•
These values are directly taken over by selecting Def - Min
- Max. Alternatively, you can also set the value manually as
described in chapter 4.11.
Picture 85:
Setting the values
Table 1:
Abbreviations in the screen
display
No
Parameter
Def
Default value
Val
Set value
Min
Minimum value
Max
Maximum value
