PAGE 20
OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
CHAPTER
INSTALLATION OF SYSTEM COMPONENTS
3.3.2. Use of other steering motors
Steering motors of competitive brands can be integrated into the
Reichhardt steering system, if it is technically possible. Reichhardt
will provide the necessary cables and adapters. The installation
and adaptation to other vehicles is described in the operator
manual of the manufacturer of such motors.
3.4.
Installation of Ultra Sound Sensors
Sensors do not require programming prior to use.
When switching vehicles, installation follows the same guide lines
as used during first installation. After installation the connector
plug of the sensors is inserted into the receiver of the vehicle.
The placement and angle of the sensors depends on the field
application (see chapter 6.1.).
Advice!
The gauge reading measurements in the
diagnostics program (see chapter 4.9.6.) should range
between 20 and 28 inches. When the sensor is properly
aligned with the guide structure/tram-line, it will find a
reading of 59 inches. In case the sensor is not positioned
correctly or defective, swing it to a different position and
test it again.
Picture 11:
Sonic sensors side by side
Picture 12:
Sonic sensors behind each other
