OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
PAGE 67
CHAPTER
PSR SKY
5.3.1. Setting a straight A–B line
A
- Field
Press “Field” to select a field which has been previously created
and stored.
B
- New
Press “New” to create a new field.
C
- Delete
Press “Delete” to delete the currently selected field.
D
- Method
Press “Method” to specify how the A-B line should be created. The
following selections are available:
•
A + B = set points A and B.
Select the button “W-width” to set your working width.
Use the button “Set A” to set point A of your A-B line and “Set B”
to set point B of your A-B line.
•
A + Heading = set point A, enter compass direction.
Select the button “W-width” to set your working width.
In the “Heading” display, select the exact compass direction in
which you wish to drive. As an alternative, you can specify the
compass direction by homing in on a certain point and driving
towards it. Confirm the selection as soon as the heading is correct.
Use the button “Set A” to set point A.
Picture 103:
Select New Job
A
B
C
D
Picture 104:
New job (A-B line)
Picture 105:
New job (A + Heading)