OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
PAGE 69
CHAPTER
PSR SKY
5.3.2. Asynchronous tracks
With different working widths, you can drive the field in the pattern
of the track entered (e.g. 10 rows of onion bed tracks and a working
width of 20 ft + 1 maintenance track for irrigation and a working
width of 10 ft). We refer here to asynchronous tracks.
Select the “AT” button and make settings for asynchronous tracks.
The following selections are available in the Asynchronous Tracks
area.
Area
A
“Seed rows”:
•
W-width = Working width of the seed rows.
•
Number of tracks = entry of tracks to be driven
Area
B
“Tram path”
•
W-width = Working width of the tram path.
•
Number of tracks = entry of tracks to be driven
Area
C
“Type of AB track 0”
•
Type of track = with which type (seed rows or tram path) the
“asynchronous tracks” should begin.
The seed rows is used e.g. when you want to harvest a track with
seeds.
The tram path is used e.g. when you wish to use a track as a
tramline.
•
Track # = with which track the selected seed rows/tram path
is to begin.
•
Active = “AT” on/off.
Confirm this entry by pressing the function key
.
Advice!
All current coordinates (Set A + Set B) with
respect to the current A-B line are accepted in the
area
C
.
Picture 108:
Asynchronous tracks
A
B
C
