Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Page: 375 / 450

5 Flight data
Distance, Speed and Height data is displayed onscreen.
Note:
Displayed Flight data is specific to the UAV app and cannot be edited.
6 Controls
Provides access to the onscreen virtual joystick controls.
7 Status area
The status area provides the:
• signal strength of the UAV’s GNSS (GPS) position fix.
• signal strength from remote controller to UAV.
• battery charge state.
• flight time remaining.
• identification of restricted no fly zones.
8 Virtual joystick
Provides Up , Down , Turn left and Turn right controls.
9 Virtual joystick
Provides Forward , Backward , Move left and Move right controls.
Note:
• The UAV app is not available on eS Series and gS Series MFDs.
• On an Axiom XL MFD the UAV connects to the same connection as a remote card reader.
Therefore, on a standalone Axiom XL MFD installation, electronic cartography, via a chart card,
will NOT be available at the same time as a connection to your UAV. Only pre-loaded world
basemaps will be available in the Chart application.
Compatible UAVs
Currently the UAVs listed below are supported:
• Mavic Pro by DJI
• Mavic Pro Platinum by DJI
• Mavic 2 Pro by DJI
• Mavic 2 Zoom by DJI
Connection to any other UAV is not approved and is performed at your own risk.
UAV sport mode
When your UAV is in Sport mode (S-Mode), control via your MFD is limited.
In Sport mode the following MFD controls are disabled virtual joystick , Gimbal pitch control , Take
off , Return to boat and Fish on / Circle me .
UAV app settings menu
You should check and configure the settings listed in the Advanced settings menu before attempting
to operate your UAV.
Advanced
Settings Description
Initial height after take-off:
Specifies the height at which the UAV will hover once it has
taken off.
Minimum safe height during UAV
goto:
Specifies the minimum safe height of the UAV when
performing a Goto.
UAV (Unmanned Aerial Vehicle) app
375