Raymarine LIGHTHOUSE 3 Page 55 Advanced Operation Instructions Download

Page: 55 / 450

Inserting external storage devices - RCR

1. Open the card reader door.
2. Insert the storage device into a card slot and push until it clicks into place.

• RCR-SDUSB slot 1 — With the contacts facing down, insert an SD card (or an SD card adaptor

containing a MicroSD card) into the upper slot, labelled (1), and push until it clicks into place.

• RCR-SDUSB slot 2 — With the contacts facing down, insert a USB drive directly into the lower

slot, labelled (2).

• RCR-2 slot 1 — With the contacts facing down, insert a MicroSD card into the upper slot and

push until it clicks into place.

• RCR-2 slot 2 — With the contacts facing up, insert a MicroSD card into the lower slot and

push until it clicks into place.

Removing external storage (SD and MicroSD)

With the card reader door open:
1. Push the card in until it clicks.
2. Pull the card free from the card slot.

Removing external storage USB drive

With the card reader door open and cover pulled down:
1. Pull the drive free from the card slot.

Caution: Ensure card reader cover or door is securely closed

To prevent water ingress and consequent damage to the product, ensure that the
card reader door or cover is firmly closed.

Set up

Summary of Contents for LIGHTHOUSE 3



































































































































































































































































































































































































































































Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands

Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands