Raymarine LIGHTHOUSE 3 Advanced Operation Instructions Download

Page: 299 / 450

Advanced tab

Settings

Description

Options

Maximum RPM

You can select a maximum RPM for your engine
dials, or allow the system to automatically
configure the Maximum RPM.

• Auto

• 3,000 RPM to 10,000

RPM

Custom RPM Red
zone

You can create a custom Red zone for your RPM
dials.

• 0 RPM to 10,000 RPM

Wind angle
response

You can configure the rate at which Wind angle
data is updated on the MFD.
The Higher the response setting the faster the
update rate will be.

• 1 to 15

Wind speed
response

You can configure the rate at which Wind speed
data is updated on the MFD.
The Higher the response setting the faster the
update rate will be.

• 1 to 15

Page settings tab

Settings

Description

Data Overlays

Enables configuration of Data overlays

Edit split ratio

Enables you to customize the position of the partitions in
splitscreen app pages.

13.5 Navigation and Sailing dials

Navigation and Sailing dials are available which provide a compass dial with various data indicators.

Apparent Wind Angle (AWA) indicator

2. True Wind Direction (TWD) indicator

Dashboard app

299

Summary of Contents for LIGHTHOUSE 3



































































































































































































































































































































































































































































Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands

Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands