Raymarine LIGHTHOUSE 3 Advanced Operation Instructions Download Page 435

Page: 435 / 450

Document
revision and
(Date)

Software
version

Changes

81370–4
(11–2017)

LH3.3

• Updated New features list to reflect LH3.3.

• Added RV transducer calibration details.

• Added MFD controls information for eS Series and gS Series.

• Added new LH3 compatible MFDs table.

• Updated Radar target tracking to include AIS targets.

• Updated Radar target settings information to include independent

Reference mode for targets, and new Trails settings.

• Added new Weather mode chapter.

• Updated User interface languages table.

• Added lists of data items available in Dashboard app and for data overlays

and sidebars.

• Added Navionics plotter sync details to Mobile app chapter.

• Added diagnostic product information details to troubleshooting chapter.

• Added LH2 to LH3 upgrade procedure to Appendix.

• Updated RV Depth and intensity setting details.

• Updated shortcuts page information to include new Disable all sounders

option.

81370–3
(09–2017)

LH3.2

• Updated software revision to reflect LH3.2.

• Updated New features section to reflect LH3.2.

• Added User programmable button details for Axiom Pro MFDs.

• Updated Software updates section to reflect updating SeaTalkng

products.

• Added wireless display information, connection details and

troubleshooting.

• Added NMEA0183 setting for Axiom Pro MFDs.

• Added Autorouting related information and procedures.

• Updated Chart selection information to include C-MAP cartography.

• Added AIS symbols tables.

• Updated Chart settings tables to include C-MAP specific and Enhanced

Navionics cartography features support.

• Added Sailing and Navigation dial overview to Dashboard chapter.

• Updated Camera app overview to include analog feeds via an Axiom Pro.

• Updated Audio app compatible entertainment systems to include

compatible Rockford Fosgate and Fusion units.

• Updated Radar troubleshooting to include high network bandwidth.

• Added NMEA0183 supported sentences table.

81370–2
(07–2017)

LH3.1

• Updated software revision to reflect LH3.1.

• Added controls details for Axiom and Axiom Pro

• Added powering on and off details for Axiom Pro.

• Removed Data source type table from Data sources.

• Re-ordered Data source and MDS paragraphs.

• Moved Factory reset procedure to para 3.3.

• Added Pilot controls to shortcuts page.

• Re-ordered memory card paragraphs and added details for Axiom Pro.

Document change history

435

Summary of Contents for LIGHTHOUSE 3



































































































































































































































































































































































































































































Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Brands by name

Popular brands

Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Brands by name

Popular brands