Raymarine LIGHTHOUSE 3 Page 432 Advanced Operation Instructions Download

Page: 432 / 450

Document
revision and
(Date)

Software
version

Changes

81370–12
(07–2019)

LH3.10

• Added new camera settings to Video app chapter.

• Added new Race Sailing features, Race Start Line and Race Timer to

the Chart app and Dashboard app.

• Added new Responder setup information to the Homescreen chapter and

SITREP feature toChart app chapter.

• Added new SR200 diagnostics to the Audio app chapter.

• Updated SR200 network requirements in the Weather mode chapter.

• Added new PDF viewer app chapter.

• Updated data overlay and sidebar data items table with new wind data.

• Added details of new Buoyweather,Shadow-Caster, PredictWind and

Offshore to LightHouse™ apps.

81370–11
(04–2019)

LH3.9

• Added new Blank sectorsto Radar app chapter.

• Added ClearCruise™ Augmented Reality support and installation for

M100/M200 series thermal cameras to ClearCruise chapter.

• Added new Fusion Multi-zone volume control to Audio app.

• Updated UAV app with DJI Mavic 2 Pro and DJI Mavic 2 zoom drone

support.

• Added new RealBathy real-time sonar map generator feature to the Chart

app chapter.

• Added new Sailing laylines feature to the Chart app chapter.

• Updated Dashboard app with sailing page and sailing dials.

• Changed Sonar app to Fishfinder app, document wide.

• Updated Weather chapter and Audio app chapter with SR200

compatibility.

• Updated Boat details section in the Homescreen chapter with new Tank

calibration options.

• Added newYamaha engine integration app chapter.

81370–10
(12–2018)

LH3.8

• Added new Search and Rescue (SAR) Patterns feature to Chart app

chapter.

• Added new Collision Avoidance and Target Intercept features to Chart

app chapter.

• Added Install third-party apps to Lighthouse third-party apps chapter.

• Updated Chart app with Chart sync setting.

• Added Regulatory approvals to settings.

• Updated Limitations on use.

• Updated Data Overlays with Loran Data Overlays.

• Added Rudder bar to Sidebar.

• Updated Audio app with JL Audio compatibility.

432

Summary of Contents for LIGHTHOUSE 3



































































































































































































































































































































































































































































Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands

Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands