Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Page: 40 / 450

1. Home — press to return to the Homescreen.
2. Menu — accesses menus. Press again to close menus.
3. UniController — provides a rotary control and a joystick that includes an OK push button for
using menus and applications.
4. Back — press to return to a previous menu or dialog level.
5. - (Minus/Negative symbol) — press to range out.
6. + (Plus/Positive symbol) — press to range in.
7. Active — press to switch the active pane, or to switch the active multifunction display (in multiple
display systems).
8. Waypoint / MOB — press and release to access the waypoint options. Press again to place a
waypoint. Press and hold to place a Man Overboard (MOB) marker at your current position.
9. Standby (Auto) — press to disengage integrated autopilot, press and hold to activate Auto
mode on integrated autopilot.
10. Power — see table below:
Configuration Display State Momentary press Press and hold
Off
Not applicable Not applicable
Single MFD
On Open Shortcuts page Power off / put into
Standby
All displays Off Not applicable Not applicable
All displays On Open Shortcuts page
on active display Power down all
displays
Multiple MFDs
1 Display On and 1
display Off Open Shortcuts page
on active display Power down active
display
Note: MFDs that are powered off must be switched back on using the MFD’s Power button.
11. Direction of Joystick Up.
4.2 Axiom and Axiom XL
Powering on the display
When power is available to the MFD but the MFD is switched off, the Power symbol will be illuminated.
To power on the display:
40