Raymarine LIGHTHOUSE 3 Advanced Operation Instructions Download Page 221

Page: 221 / 450

Note:

• SITREP status is transmitted every 15 seconds if a vessel is traveling at 3 knots or more.

• SITREP status is transmitted every 30 seconds if a vessel is traveling under 3 knots for more

than 3 minutes.

The SITREP status of other vessels is displayed in the Blue Force Target’s context menu in the
Chart app and Radar app.

The MFD supports both current (FID 10) and legacy (FID 56) SITREPs.

Note:

• Blue Force targets using Legacy SITREP FID 56 are displayed using the Blue Force icons,

however cannot be interacted with (i.e.: you cannot send or receive text messages, SAR patterns
or TOIs).

• Blue Force targets using Legacy SITREP FID 56 can also be displayed when using an NMEA

0183 connection but cannot be interacted with.

First responder

221

Summary of Contents for LIGHTHOUSE 3



































































































































































































































































































































































































































































Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Brands by name

Popular brands

Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Brands by name

Popular brands