Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Page: 49 / 450

Angle adjustment Apply an offset to the angle.
Speed adjustment
Apply a scaling factor to apparent wind speed.
Speed
Calibrate your speed transducer.
Note:
For best results, ensure that there is minimal or no tide/current effect when calibrating speed
through water.
Set STW to SOG Apply a scaling factor to all STW readings, based on the present
difference between STW and SOG.
Adjust STW Apply a scaling factor to all speed through water values.
Assigning a function to the User Programmable Button (UPB)
You can assign a function to the User Programmable Button on an Axiom™ Pro MFD.
1. Press and hold the
User Programmable Button on the MFD.
2. Select the required function from the list.
You can also assign a function to the User Programmable Button from the Settings menu:
Homescreen > Settings > This Display > User Configurable Key .
Performing a settings or factory reset
Performing a Factory reset will erase ALL user data and reset the display’s settings to their Factory
default values. Performing a Settings reset will restore your display’s settings to factory defaults,
whilst retaining user data.
1. Select
Settings reset , from the This display menu: Homescreen > Settings > This display >
Settings reset to perform a settings reset.
2. Select Factory reset , from the This display menu: Homescreen > Settings > This display >
Factory reset to perform a factory reset.
Importing user data
You can import user data (i.e.: Waypoints, Routes and Tracks) to your MFD.
1. Insert the MicroSD card that contains your user data files into a card reader slot on your MFD
or connected card reader.
2. Select Import from card from the Import/export page: ( Homescreen > My data > Import/export
> Import from card ).
3. Select the relevant SD card slot from the file browser and then navigate to your User data file
(.gpx).
4. Select the relevant GPX file.
Your user data has now been imported.
5. Select OK .
Set up
49