Raymarine LIGHTHOUSE 3 Advanced Operation Instructions Download Page 327

Page: 327 / 450

Settings

Description

Options

Light

For cameras that include a light this setting
switches the camera’s light on and off as well as
flashing mode and SOS mode.

• On

• Off

• Flash

• SOS

Palette

Various color palettes are available to suit
different conditions or your personal preference.

• WhiteHot

• BlackHot

• RedHot

• RedHot Inverse

• Fusion

• FireIce

• FireIce Inverse

Scene

Scene presets that have been optimized for
different running conditions.

• Day

• Night

• Docking

• High contrast

Auto focus

The camera will focus the image.

• Activate

Low light mode

Visible cameras supporting low light mode can
set this during low light conditions.

• On

• Off

• Auto

Wide Dynamic
Range

Improves the viewable range of darkness to
lightness of the image.

• Disable

• Enable

Contrast
Enhancement

Adjusts the brightness and contrast of the
image to make dark and bright sections more
distinguishable.

• Disable

• Enable

Electronic
stabilization

Stabilizes the image to reduce blurring caused
by camera shake.

• Disable

• Enable

Digital Zoom

Zooms the camera feed to maximum.

• Disable

• Enable

Roll
correction

(Requires

AR200)

Accounts for boat tilting and will adjust video
feed accordingly. Video feed horizon will be
parallel with the actual horizon.

• Disable

• Enable

Camera setup tab

Settings

Description

Options

Heater

Enables and disables the camera’s built-in heater
used to de-mist the camera lens.

• Disable

• Enable

Zoom Lock

Synchronize zoom level between visible and
thermal camera feeds.

• Disable

• Enable

Mirrored view

Flips the camera image to provide a mirror
image, suitable for rear view installations.

• Disable

• Enable

Camera name

Change your camera name.

• Displays the onscreen

keyboard.

Icon

Select the icon to be used for the camera.

• List of icons.

Video app

327

Summary of Contents for LIGHTHOUSE 3



































































































































































































































































































































































































































































Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Brands by name

Popular brands

Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Brands by name

Popular brands